Reference Manual

VHL.Read

This command reads data from a card based on a VHL file. In this file, you specify the card-specific memory structure. You can either add the VHL file to your reader configuration or create it dynamically using VHL.Setup.

Properties

Command code: 0x0102
Command timeout: 3000 ms
Possible status codes: General status codes, VHL.ErrCardNotSelected, VHL.ErrHf, VHL.ErrConfig , VHL.ErrAuth, VHL.ErrRead, VHL.ErrHw , VHL.ErrApdu

Parameters (request frame)

Name	Type/Size	Description
Id	Integer (8 bits)	ID of VHL file (starting at 0) If you create the VHL file dynamically, use the ID 0xFF. If you've added the VHL file to the reader configuration, please resolve the ID from the VHL file name using VHL.ResolveFilename. Don't hardcode the ID. Otherwise, your application won't work anymore if e.g. a project manager later merges VHL files into a different configuration using BALTECH ConfigEditor. This process may result in a new ID, but not in a new name.
Adr	Integer (16 bits)	Address of the byte where you want to start reading
Len	Integer (16 bits)	Number of bytes to read

Returned values (response frame)

Name	Type/Size	Description
Data	Raw data (until end of frame)	Data read from the card